MOLD INSPECTIONS, SURVEY AND MOLD TESTING.

We have added Thermal Scanning Camera Inspections to our Mold Inspection services. The tool is mainly used to locate and pinpoint sources of leaks and water intrusion in buildings eliminating the need for destructive source finding. The method is most efficient shortly after a leak occurred and less effective when no moisture remain in the building material. It can collect Color thermal images that can be e-mailed to client or used for documentation in reports. Go to the link above to find out more. Contact us for a demo.

There are many more instances when thermography can be utilized. Here are a few:

• Benefits of Infrared Thermography
• Significantly reduce unscheduled power outages
• Detect problems quickly, without interrupting service
• Assess priorities for corrective action
• Minimize preventive maintenance and troubleshooting time
• Comply with insurance company requirements
• Check for defective equipment while still under
  manufacturer warranty.

Electrical Systems:

• Power generation inspections including exciters,
  4160 connections, motor control centers and isophase bus ducts.
• Substation Electrical inspections including switchgear,
  breakers, transformers and capacitor banks.
• Overhead urban and rural distribution
  electrical inspections. Electrical motor inspections.

Building Envelopes and Structures: 

• Thermal heat loss inspections for buildings, plants,
  facilities, refineries.Moisture contamination evaluations
  in buildings, condo's, plants facilities.
• Concrete integrity inspections
• Concrete water heated floor inspections for leaks and
  temperature distribution
• Locate missing or damaged insulation
• Identify air leakage energy losses
• Evaluate the thermal performance of retrofits
• Locate radiant heating wires or pipes
• Detect delaminations in concrete bridge deck
• Locate and identify mold growth areas in building structures

Roofing Systems:

• Flat roof leak detection for buildings, plants, facilities
• Identify water damaged portions of a roof quickly and accurately
• Eliminate unnecessary replacement of good roofing
• Plan accurate budgets based on facts
• Document problems before the warranty/bond expires.

Mechanical Systems

• Boilers
• Inspect burners for flame impingement and burner management
• Look at combustion patterns of fuel
• Detect thermal patterns on boiler tubes and measure
  tube skin temperature during normal operation or
  when boiler is on standby
• Scan and record temperatures in areas of boiler not monitored
• Scan the exterior of boiler for refectory damage or
  locate warmer areas where potential refectory damage
  may occur
• Detect coke buildup in crude oil furnaces
• Power Plant boiler flue gas leak detection
• Mechanical bearing inspections
• Heat ventilation air conditioning equipment evaluation
• Cold Storage cooling losses.
• Detect insulation leaks in refrigeration equipment

Petrochemical Applications

• Refinery process line insulation loss or leak detection
• Refinery process evaluation
• Heat exchanger Quality and efficiency evaluation
• Furnace refractory (insulation) inspections
• Furnace Internal flame evaluation and tube inspections
• Flame propagation explosion analysis.

Electronic Equipment

• Printed circuit board evaluation and troubleshooting.
• Thermal mapping of semiconductor device services
• Circuit board component evaluation
• Production-type inspection of bonded structures
• Inspection of hybrid microcircuits
• Inspection of solder joints

Environmental Applications

• Locate old waste disposal sites
• Locate old buried tanks on industrial sites
• Locate and monitor oil spills
• Research and development applications
• Design proto typing evaluation

Environmental Applications

• Automotive Applications
• Motor racing suspension and tire contact diagnostics
• Brake and engine systems evaluation for performance
  and cooling efficiencies

Aerospace Applications

• Water ingress in airplane control surfaces and radomes
• Tire and brake system diagnosis
• Windshield and wing surface deicing system diagnosis
• Stress crack and corrosion identification and location
• Jet and rocket engine analysis
• Composite materials delamination and disbanding location
• Target signature analysis

Medical / Veterinary Applications

• Medical injury examinations for whiplash, back injuries,
  Carpal Tunnel syndrome
• Disease evaluation - breast cancer, arthritis and many more
• Dentistry, tempomandibular jaw dysfunction and more
• Sports injuries evaluation, and therapy progress
• Equine (horse) injury examination, stress fractures,lameness
• Laser dosimetry determination

Airborne applications

• Pipeline inspection, leak detection, stress corrosion
  cracking areas
• Environmental inspections, pollution dumping, thermal
  dumping of waste water
• Fire Mapping, hold over fires, fire line and mop-up inspections
• High Voltage Aerial Electrical inspections for transmission lines
• Search and rescue
• Covert surveillance

Pulp and Paper

• Detect uneven heat distribution in Fourdrinier steam boxes
• Identify wet streaks, non-uniformity, that can have adverse
  effects on paper quality
• Identify basis weight variations
• Monitor size press performance
• Analyze dryer temperatures to look for non-uniformity in dryers
• Monitor coating to see that it is being applied uniformly to
  surface of the paper
• Analyze reel to find anomalies that may be induced by
  pieces of process equipment connected to the paper machine
• Inspect chip piles for hot spots

Steam Turbine and Hydroelectric Generators

• Locate inter-laminar faults in stator cores
• Monitor the effectiveness of repairs to the damaged areas
• Help maintain quality control during a stator core repair
• Obtain a thermal image of the stator core that serves
  as a permanent record of the condition of the stator
  core following repairs

Miscellaneous Applications

• Detect RF heating in antennas, wave guides, guy wires
  and frame structures
• Locate low-intensity sleeper fires on forest lands
• Locate lost people
• Remote sensing applications
• Firefighting – Locate people in burning buildings
  and navigate through smoke
• Locate non uniform densities in hot mix asphalt paving
• Locate moisture and delaminations in marine construction

For emergency assistance Call 213-305-0840